TGL2209-SM 8.0-12.0 ghz 50 watt vpin limiter datasheet: rev - 09-04-15 - 1 of 9 - disclaimer: subject to change without notice ? 2015 triquint www.triquint.com , www.qorvo.com pad configuration pad number symbol 1, 3, 8, 10, 15 gnd 2 rf input 4?7, 11?14 nc 9 rf output note: the rf input and output ports are not interchangeable. applications ? receive chain protection ? commercial and military radar general description the qorvo TGL2209-SM is a high power, x-band gaas vpin limiter capable of protecting sensitive receiv e channel components against high power incident signals. the TGL2209-SM does not require dc bias and achieves a low insertion loss in a small form f actor. these features allow for simple integration with mi nimal impact to system performance. the TGL2209-SM operates from 8.0?12 ghz with low insertion loss of less than 0.5 db. receive protect ion is rated up to 50 w incident pulsed-power with a low f lat leakage of less than 18.5 dbm. the TGL2209-SM is offered as a packaged limiter, an d is well suited for both commercial and defense rela ted applications. lead-free and rohs compliant. evaluation boards available on request. product features ? frequency range: 8.0 to 12.0 ghz ? insertion loss: < 0.5 db ? peak power handling: 50 w (pulsed) ? flat leakage: < 18.5 dbm ? spike leakage < 20.5 dbm ? passive (no dc bias required) ? recovery time < 115 ns ? package dimensions: 4.00 x 4.00 x 1.54 mm functional block diagram ordering information part eccn description TGL2209-SM ear99 8.0?12.0 ghz 50w vpin limiter TGL2209-SM_evb ear99 8.0?12.0 ghz 50w vpin limiter evaluation board
TGL2209-SM 8.0-12.0 ghz 50 watt vpin limiter datasheet: rev - 09-04-15 - 2 of 9 - disclaimer: subject to change without notice ? 2015 triquint www.triquint.com , www.qorvo.com absolute maximum ratings parameter value incident power, pulsed 1 , 50 , 25 c 47 dbm incident power, pulsed 1 , 50 , 85 c 46 dbm incident power, cw, 50 , 25 c 40 dbm incident power, cw, 50 , 85 c 36 dbm mounting temperature (30 s max) 260 c storage temperature -40 to 150 c note: 1 pulse conditions: pw = 100 us, duty cycle = 10% operation of this device outside the parameter rang es given above may cause permanent damage. these are stress ratings only, and functional operation of th e device at these conditions is not implied. recommended operating conditions parameter value passive ? no bias electrical specifications are measured at specified test conditions. specifications are not guaranteed over all operating conditions. electrical specifications test conditions unless otherwise noted: 25 c parameter min typical max units operational frequency range 8.0 12.0 ghz insertion loss < 0.5 db input return loss > 17 db output return loss > 18 db flat leakage power at p in > 30 dbm < 18.5 dbm pulse recovery time < 115 ns spike leakage < 20.5 dbm insertion loss temperature coefficient 0.006 db/ c thermal and reliability information parameter test conditions value units incident power (rf operational life test (1) ) 10 ghz pulsed, pw=100 us, dc=10%, 50 , 25 c 50 w notes: 1. test terminated after 100 hours.
TGL2209-SM 8.0-12.0 ghz 50 watt vpin limiter datasheet: rev - 09-04-15 - 3 of 9 - disclaimer: subject to change without notice ? 2015 triquint www.triquint.com , www.qorvo.com typical performance: small signal test conditions unless otherwise noted: 25 c -3.0 -2.5 -2.0 -1.5 -1.0 -0.5 0.0 4 5 6 7 8 9 10 11 12 13 14 15 16 insertion loss (db) frequency (ghz) insertion loss vs. frequency vs. temp. -40 c +25 c +85 c -30 -25 -20 -15 -10 -5 0 4 5 6 7 8 9 10 11 12 13 14 15 16 input return loss (db) frequency (ghz) input return loss vs. freq. vs. temp. -40 c +25 c +85 c -30 -25 -20 -15 -10 -5 0 4 5 6 7 8 9 10 11 12 13 14 15 16 output return loss (db) frequency (ghz) output return loss vs. freq. vs. temp. -40 c +25 c +85 c
TGL2209-SM 8.0-12.0 ghz 50 watt vpin limiter datasheet: rev - 09-04-15 - 4 of 9 - disclaimer: subject to change without notice ? 2015 triquint www.triquint.com , www.qorvo.com typical performance: large signal test conditions unless otherwise noted: 25 c, cw input power 0 2 4 6 8 10 12 14 16 18 20 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 output power (dbm) input power (dbm) output power vs. input power vs. freq. 8 ghz 11 ghz 9 ghz 12 ghz 10 ghz temp. = 25 c 0 2 4 6 8 10 12 14 16 18 20 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 output power (dbm) input power (dbm) output power vs. input power vs. temp. -40 c +25 c +85 c frequency = 10.0 ghz 12 13 14 15 16 17 18 19 20 30 31 32 33 34 35 36 37 38 39 40 output power (dbm) input power (dbm) output power vs. pin vs. frequency 8 ghz 11 ghz 9 ghz 12 ghz 10 ghz 12 13 14 15 16 17 18 19 20 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 output power (dbm) input power (dbm) output power vs. pin vs. frequency 8 ghz 11 ghz 9 ghz 12 ghz 10 ghz pulsed rf power: 100us/10%
TGL2209-SM 8.0-12.0 ghz 50 watt vpin limiter datasheet: rev - 09-04-15 - 5 of 9 - disclaimer: subject to change without notice ? 2015 triquint www.triquint.com , www.qorvo.com applications circuit
TGL2209-SM 8.0-12.0 ghz 50 watt vpin limiter datasheet: rev - 09-04-15 - 6 of 9 - disclaimer: subject to change without notice ? 2015 triquint www.triquint.com , www.qorvo.com applications information ? evaluation board (evb) evb layout rf layer is 0.008? thick rogers ro4003c, r= 3.38. metal layers are 0.5-oz copper. the microstrip line taper at the connector interface is optimized for the southwest microwave end- launch connector 1092-01a-5. the pad pattern shown has been developed and tested for optimized assembly at triquint semiconductor. the pcb land pattern has been developed to accommodate lead and package tolerances. since surface mount processes vary from company to company, careful process development is recommended. evb package mounting detail note: multiple copper-filled vias should be employed unde r die to minimize inductance and thermal resistance .
TGL2209-SM 8.0-12.0 ghz 50 watt vpin limiter datasheet: rev - 09-04-15 - 7 of 9 - disclaimer: subject to change without notice ? 2015 triquint www.triquint.com , www.qorvo.com mechanical drawing and pad description package pad symbol description 1, 3, 8, 10, 15 gnd on pcb, multiple copper-filled vias should be emplo yed under the center pad (15) to minimize inductance and thermal resistance 2 rf input rf input, matched to 50 ohms, not dc blocked 4?7, 11?14 nc no connection 9 rf output rf output, matched to 50 ohms, not dc blocked note: the rf input and output ports are not interch angeable.
TGL2209-SM 8.0-12.0 ghz 50 watt vpin limiter datasheet: rev - 09-04-15 - 8 of 9 - disclaimer: subject to change without notice ? 2015 triquint www.triquint.com , www.qorvo.com recommended soldering temperature profile
TGL2209-SM 8.0-12.0 ghz 50 watt vpin limiter datasheet: rev - 09-04-15 - 9 of 9 - disclaimer: subject to change without notice ? 2015 triquint www.triquint.com , www.qorvo.com product compliance information esd sensitivity ratings caution! esd-sensitive device esd rating: tbd value: tbd test: human body model (hbm) standard: jedec standard jesd22-a114 eccn us department of commerce: ear99 solderability compatible with both lead-free (260 ? c maximum reflow temperature) and tin/lead (245 ? c maximum reflow temperature) soldering processes. rohs-compliance this part is compliant with eu 2002/95/ec rohs directive (restrictions on the use of certain hazardous subst ances in electrical and electronic equipment). this product also has the following attributes: ? lead free ? halogen free (chlorine, bromine) ? antimony free ? tbbp-a (c15h12br402) free ? pfos free ? svhc free contact information for the latest specifications, additional product i nformation, worldwide sales and distribution locati ons, and information about triquint: web: www.triquint.com tel: +1.972.994.8465 email: customer.support@qorvo.com for information about the merger of rfmd and triqui nt as qorvo: web: www.qorvo.com for technical questions and application information : email: info-products@tqs.com important notice the information contained herein is believed to be reliable. triquint makes no warranties regarding th e information contained herein. triquint assumes no responsibilit y or liability whatsoever for any of the informatio n contained herein. triquint assumes no responsibility or liability whatsoever for the u se of the information contained herein. the informa tion contained herein is provided "as is, where is" and with all faults, and the entire risk associated wit h such information is entirely with the user. a ll information contained herein is subject to chang e without notice. customers should obtain and verify the latest relevant information before p lacing orders for triquint products. the informatio n contained herein or any use of such information does not gr ant, explicitly or implicitly, to any party any pat ent rights, licenses, or any other intellectual property rights, whether with re gard to such information itself or anything describ ed by such information. triquint products are not warranted or authorized f or use as critical components in medical, life-savi ng, or life- sustaining applications, or other applications wher e a failure would reasonably be expected to cause s evere personal injury or death.
|
